The press bed registration grid from our own production etching press, built at true size for your bed. Plates and soaked paper go down in the same place every time.
$15.00
We spent two years designing the production etching press bed we wanted, and put everything we needed into this grid. In the year since, we haven’t had to make a single custom plate or paper guide. Everything lines up on the grid.
Lay the printed grid on your press bed under a clear polycarb 1/8″ (3mm) thick sheet to use.

Only the guides that fit your bed are drawn. On the smallest beds the edge rulers are left off so the paper can use the whole bed. The 4-up diagonals appear only where four sheets fit.
Pick inches or centimeters, then your press bed size. Plate and paper guides are the same real sizes in both versions. Each purchase is one editable SVG file for one bed size and one unit system.
How do I print the grid?
Open the SVG in Photoshop (or Illustrator or Inkscape) at 100% and print it at full size on a wide-format plotter. Trim it to the bed, lay it on the press bed and you’ll see right away that it fits.
Can I change the grid?
Yes. Every part of the grid is a vector in its own layer group, so you can hide guides you don’t use, recolor them or add your own.
I don’t see my bed size listed. Can I order a custom size registration grid?
Yes. Email us at hello@printsonpaper.studio with your press bed dimensions and we’ll make you a custom-sized grid.
Inches or centimeters?
Choose the ruler system you work in. The plate and paper guides are the same real sizes either way. If you want both, buy one of each.
How do I get the file?
The download link appears on your order confirmation and in your account right after you pay.